Leave message
Can’t find what you’re looking for?
Fill out this form to inquire about our custom protein services!
Inquire about our Custom Services >>
Request a FREE Sample of our FcRn Binding Kit!
Request a FREE Sample of our Fc gamma RI / CD64 Binding Kit !
Limited Edition Golden Llama is here! Check out how you can get one. Limited Edition Golden Llama is here! Check out how you can get one.
Request a FREE sample of our GMP products! Request a FREE sample of our GMP products!
Use this kit to detect residual DNA after the DNA is extracted from test samples. For achieving the better DNA recovery, it is recommended to use the resDetect™ resDNA Sample Preparation Kit (Magnetic Beads) (Cat. No. OPA-R005) in combination.
The kit is used for quantitative detection of residual CHO DNA in biopharmaceutical production.
For use in quality control/manufacturing process only.
It is for research use only.
High sensitive: LLOQ (Lower limit of quantitation) is 3 fg/μL
Figure 1. High sensitivity and broad dynamic range using the CHO resDNA Quantitation Kit. (A) Typical analysis results obtained with Standard 1 (300 pg/μL) to 6 (3 fg/μL). (B) The standard curve of the 10-fold dilution series. PCR efficiency should be 90-110%.
High specificity: No cross-reactivity with unrelated DNA
Figure 2. Assay specificity. Standard curves generated using 10-fold serial dilution of CHO genomic DNA (included in the kit).
High consistency：Consistent performance across the expected range of DNA fragment sizes
Figure 3. Consistent quantitation across a broad range of fragment sizes. Standard curves were generated using a 10-fold serial dilution of gDNA and fragmented DNA. Fragmented DNA was generated by sonicating total CHO genomic DNA (10 min, 20 min, 30min).
The validation of standard curve
Figure 4. The amplification efficiency of standard curve (ACRO and Competitor J) is close to 100%, while the amplification efficiency of standard curve (Competitor H) is less than 90%.
The validation of spike recovery
Figure 5. The validation of spike recovery in three spike levels CHO DNA samples (high, medium, low). Results show that the recovery using the ACRO products are between 90 and 100%.
Complex Sample Simulation Testing
For samples with high concentration BSA (up to 150 mg/mL) and different pH buffers (3.0 ≤ pH ≤ 10.0), the resDetectTM kits were used for the extraction and detection of CHO resDNA. The acceptable spiked recovery range should be 50-150%. The results showed that the spiked recoveries were all between 98-120%. The results are shown in the table below.
Testing of complex samples from CHO antibody purification process
For samples from different steps (AF, VI, AEX, and DF) in the CHO antibody purification process development , the extraction and detection of CHO resDNA were performed using the resDetectTM kits. The acceptable spiked recovery range is 50-150%. The results showed that the spiked recoveries for the various intermediate samples were all close to 100%.
| ID | Components | Size |
| OPA-R004-01 | 2×qPCR Master Mix | 1.0 mL×2 |
| OPA-R004-02 | CHO Primer & Probe Mix | 700 μL |
| OPA-R004-03 | CHO DNA Control（3ng/μL） | 100 μL |
| OPA-R004-04 | Dilution Buffer | 1.5 mL×3 |
| OPA-R004-05 | DNase/RNase-Free Water | 1.0 mL |
Price(USD) : $1133.00
Price(USD) :
Explore our catalog of therapeutic antibody solutions to find the right products for you! We are dedicated to delivering solutions designed to help you drive innovation and push the boundaries of what therapeutic antibodies can be.
We offer a wide range of cell and gene therapy solutions starting from discovery to the clinic. Explore our wide range of proteins, antibodies, kits, and other assays to accelerate the development of your cell and gene therapy.
Organoid Toolbox is a collection of organoid solutions including ready-to-use organoids, organoid differentiation kits, and a variety of services to accelerate the progress of your drug development project.
ACROBiosystems developed a series of GMP grade cytokines under the GMP grade quality management system. Those products are all suitable for T/NK cell generation, activation, and proliferation in cell therapy research.
50+ targets designed for CAR detection, including PE/FITC/biotin labeled proteins. The key reagents for CD19 and BCMA were FDA DMF filed which can support your IND, NDA and BLA process.
Full length multi-pass TPs with stabilized structure and high bioactivity for immunization, antibody screening, cell based assay and CAR detection, including hot CD20, Claudin 18.2， CD133, GPRC5D，CCR8, CCR5, etc.
GMP grade cytokines, reagents for cell activation, gene edition, DNA/RNA removal, etc. Particularly focus on product design, quality control and solution-based support to link each phase of your cell and gene therapy journey.
A series of immune checkpoints including classic co-inhibitory and co-stimulatory receptors. The comprehensive catalog contains 100+ targets with various species and tags, and the high-quality proteins are in good batch-to-batch consistency.
To meet the needs of ADCs development, ACROBiosystems can provide: A variety of high-quality target proteins; MMPs/Cathepsin/uPA for cleavable linker; Anti-payload antibodies & anti-idiotypic antibodies for immunogenicity and PK analysis; SPR/BLI analytical and ADA development service.
Comprehensive collection of Fc receptor proteins, including their common variants, which can help expedite your antibody development.
Comprehensive cytokine targets including interleukins, growth factors, chemokines, TNFs, etc. are expressed by HEK293 to ensure their natural structure. Their high purity is verified by SDS-PAGE/HPLC/SEC-MALS and high bioactivity is verified by ELISA/SPR/BLI.
Aneuro provides innovative solutions for neuroscience research. Recombinant proteins, neural factors, pre-formed fibrils, electrophysiological electrodes, as well as Organoid Toolbox all in Aneuro aiming to advance neuroscience research, develop therapeutic interventions, and improve diagnostic methods for neurological diseases.
This web search service is supported by Google Inc.
A-Z
